roger
New Member
Posts: 25
|
Post by roger on Oct 25, 2007 12:14:24 GMT
A tip for you Poms. paintng boats out hear recomended by the oyster farmers is to use paving paint I have it on my 12ft tinny (no not beer) for over a year and still looking good. Have used high gloss on outside and inside semi gloss with sand finish so do not slip. Roger
|
|
|
|
Post by Lavy on Oct 25, 2007 15:15:22 GMT
Used the stuff they paint workshop floors to do the inside of mine, sounds like it could be the same, exellent .
|
|
roger
New Member
Posts: 25
|
Post by roger on Oct 26, 2007 0:11:17 GMT
Yes that is the paint I put on a coat of Penatrol which also is a rust preventer and penetrating primer fills in scratches etc and will stick to anything and makes top coat go on much easier, was good on trailor no more rust Roger
|
|
|
|
Post by Pete B on Oct 29, 2007 18:56:34 GMT
Great tip but be cautious, alot depends on what's been previously used.
Single part paints (ready to use out of a can) wont sit on top of a proper 2 part paint but 2 part paints will bond to most coatings providing their sound (including single part paints). I'd always opt for 2 part gear to be safe. Not cheap but it could be the only answer in alot of cases.
|
|
