|
Post by meoc4life on Nov 11, 2007 15:43:28 GMT
how do u keep a multiplier in full working order
|
|
|
Post by greysfanboy on Nov 11, 2007 16:56:59 GMT
Rinse in fresh water after each trip. Drop of oil on the spindle once every year or so.
The bearings might get filled up with crap over time. I can tell if this has happened to mine by the response of the spool when casting but it might not be obvious especially to a novice. You could drop them in lighter fuel once every year or so and re-oil.
|
|