|
|
Post by skatenchips on Mar 23, 2007 18:51:06 GMT
soz to be a pest but ive trashed the plastic heads on my tripod when it went over in the wind and wanted to try and contact Ian gold,s co directly to see if he can send me replacements.........but im damned if i can find a web page does anybody know where they are based/web page addy. cheers Gaz  |
|
|
|
Post by pegasus on Mar 23, 2007 19:03:10 GMT
are they the funny shaped ones?
because i have a spare head set for an Ian golds tripod here.
bought it for someone who never collected
|
|
|
|
Post by maghouse on Mar 23, 2007 19:04:59 GMT
No internet as far as I know but I am in touch with him (sort of !) local shop has spare heads for around a £5 ...
Try 'pegasus first, if not the right one - let me know
|
|
|
|
Post by slippery on Mar 23, 2007 20:01:59 GMT
Any outlet for the ian golds rod rest can get the parts within 7 days so i have been informed.
|
|
|
|
Post by cuckoo on Mar 23, 2007 20:23:06 GMT
Hi gary ,
i know for a fact that als tackle has them in stock , ill pm you phone number !!!!!
lee.
|
|
|
|
Post by skatenchips on Mar 23, 2007 21:09:12 GMT
pegasus....errrrr here we go
it is a plastic frame with a one open sided square set into it
at a 10 o clock or 2 o clock angle depending on which way you want it set into the wind.....it has a 5mm bolt through the base
with a plastic retaining knurled nut on that goes through the main t bar at the top.geeeeez woulda been easier to take a piccy......lolol
i think i can salvage one with some strong glue....so its
just the one im looking for really....
strange that they dont have a web site..!!!!
many thanks for the response anyway.
Gaz
|
|
|
|
Post by skatenchips on Mar 23, 2007 21:29:28 GMT
i sent you a PM re the hooks you were selling Pegasus
can you confirm the Pm works......if not rec
i will send my request again.
Ta Gaz
|
|
|
|
Post by pegasus on Mar 24, 2007 16:35:48 GMT
hi mate, i am sorting a price list out but it is fairly large and i keep coming away to rest my weary head.
I will have it off to you sometime tomorrow.
|
|
|
|
Post by skatenchips on Mar 25, 2007 19:52:27 GMT
ok, Pegasus thank you i will be very interested as maybe some others might too..!!!!! Gaz  |
|
|
|
Post by Steve (Original Leadchukka) on Mar 25, 2007 21:15:39 GMT
Gaz Rover's Tackle on Fareham has a selection of spare parts for Ian Golds Tripods. Maybe worth giveing them a ring to see if they have what you want (01329 220354). I have to say that I have only seen replacement top bars complete - not just the rod clips. A website is www.lathams-fishing.co.uk/view-products/category/97.html they have various spares. You could always do what RichardB does and that is tie them on with lots of elastic bands!! Sorry Richard! |
|
|
|
Post by skatenchips on Mar 25, 2007 21:38:14 GMT
spot on steve........£3.50 for a complete bar........ill bell em in the mornin..... and thankyou to all who offered help.. Gaz...  |
|
|
|
Post by skatenchips on Mar 26, 2007 15:55:51 GMT
job done steve.....in the post to me as we speak thanks for your help.. Gaz ;D |
|
|
|
Post by elmerfudd on Mar 29, 2007 12:26:15 GMT
If it goes again why not consider the Veals Pro Tripod kit - this is all metal (head and pots) and should fit an Ian G 'pod - any pod with a square section Ali rear leg! I've converted my Mustad 'pod after all the plastic bits broke (they go brittle in a frost and snap real easy).
|
|
|
|
Post by solehunter on Mar 29, 2007 12:31:59 GMT
Welcome to the forum elmerfudd, sounds like good advise. All metal looks the way to go.
|
|
|
|
Post by RichardB on Mar 29, 2007 15:24:08 GMT
Gaz You could always do what RichardB does and that is tie them on with lots of elastic bands!! Sorry Richard! Oi ! custom job that ! |
|
